XDR 44 Flushby Rig

Deck Dimensions 

5 or 8 meter fully welded structure(depending on truck used) – channel & RHS/four levelling jacks

Hoist Mast

Single Stage Telescopic Mast – Variable over vertical gradient of  3.5 degrees with PLC lock sensor. Crown Height above ground 16 metres.

Hook Load

Operating Hook Load extended 20,000 kgs, 44,000lb.

Working Platform

Variable from ground to 3.0 metres

Draw Works Winch

44,000 lbs. Variable work winch, 22mm rope single line, 550 lb. jib winch.

Power Unit 

Truck Engine 335 HP Diesel engine provides the power for the Workover System

Main Hydraulic Pumps

Main Pumps and Motors are Kawasaki Pumps/ Brevini Winch motors.

Water Pumps 1 x Main Pump Triplex approximately 1000 litres per minute/1000 PSI, Bertolini 5000 PSI test pump and a charge pump.

On Board Fluid Tank

Total capacity 1,600 litres on 6 x 4 trucks and 10,000 litres on 8 x 4 trucks split into 2 compartments to allow for returns.

Water Manifold 

2″ Diameter 3 way stainless ball valves pneumatic actuated. Enables all water process configurations to be automated and controlled from the rigs control panel. Includes reverse flush, choke and pressure relief valve.